Ministorum Priest Conversion

This conversion was accomplished using a Chaos Cultist. The head is from Maxmini. I created the staff using some styrene rod, the tip of a glue applicator, and a the Forgeworld icon shown below.

The head of the staff was created by molding and casting two copies of the Forgeworld Inquisition icon. They were then trimmed down to the icon only and glued back to back. The purity seals are also green stuff.

The book is green stuff sandwiched between styrene. The strap around the book is more green stuff and the skull was scraped off another model with a razor blade then applied to the book.

The censor, robes, and a good portion of the right arm are green stuff.

The original model used was the cultist pictured in the lower left of the box artwork shown below.

Chaos Cultist to Ministorum Priest Conversion WIP

I bought the above pictured $10 set of Chaos Cultists with the intention of using them for some conversion work. Ultimately I wanted to make some primaris psykers and ministorum priests.

While not yet painted the below Ministorum Priest was created using the model pictured in the bottom left of the above photo. It took a great bit of chopping, green stuff, and bits, but here it is.

The robe, rope, censer, book and purity seals are all green stuff. The pole is styrene rod, the pointed bottom is cut from a disposable glue applicator the top is made from two Forgeworld Inquisition icons. The head is from Maxmini.