Friday, November 27, 2020

To Boldly Go


Shortly after purchasing my Elegoo Mars Pro resin 3D printer I set about trying to teach myself how to use Autodesk's Fusion 360. There is a free version allowed for non-commercial work or you can pay a monthly or annual subscription for commercial use. 

I've created a playlist of some of the videos I found most useful in creating this project on my new Youtube channel here:


For my first project I decided on brining my favorite Matt Dixon painting "To Boldly Go" to life. 

Once designed in Fusion 360 I exported the model to Chitubox to be sliced for my printer. A few prints of the smaller parts failed and I had to adjust my supports a couple of times before I was able to produce satisfying results.


Using Matt Dixon's painting as a canvas in Fusion 360 I created several sketches which were extruded into the shapes which comprise the robot and his rocket ship. A surprising amount of 3D information can be determined from a 2D painting.

Still there were details I had to take creative liberty with. The interior of the cockpit for example isn't visible in the painting. I designed some gauges and vents for the dash, a diamond plate tread for the floor, the seat, and the legs and feet of the robot.

 

I modeled all of this to be printed in several pieces


The antenna was printed as part of the head but proved to be quite delicate and I've had to reattach it at least 4 times. In the above photo the lifting arm is shown in place, it is a separate piece.

I did purchase clear resin for printing the windscreen but ultimately decided on cutting it out of clear plastic packaging. 

I noticed a few issues with the design, such as the tolerances being too tight and some cutaways that were missing. I made the corrections in Fusion 360 and reprinted the model in a much large scale. 

 

This larger version I packed away for later and proceeded to paint and assemble the smaller version. I began in my usual method of joining subassemblies and painting base colors. These were all quite bright but would be toned down later during the weathering process.


For the base I scaled the original painting on my computer screen until it matched the model in my hand. I then traced the background on a piece of paper which I cut out as a template. Using that, I made the base from stacked plywood and 1/8" MDF which was glued together, coated in wood filler, sanded, and then textured with plaster. 

The name plate was also designed in Fusion 360 and printed with the Elegoo Mars. I printed it in various scales between 30-45mm in height so that I could pick the one I found most appealing. This was my second go at the name plate. In my first attempt I noticed all too late that I had misspelled 'Boldly"! Oops. 



The power cord was made from a bit of wire and the plug was made out of scratch polystyrene tube and sheet. I used the same sheet material to make the power plate on the wall which I changed from UK to NA standard. The base and the model were painted with Army Painter and Vallejo acrylics, weathered separately with acrylic washes, and then the model was glued down to the base. Lastly I placed a few pieces of sand with tweezers and painted them to match.

 

 


 

If I had it to do over again I would change a couple of things. First I wouldn't use metallic paints to paint the robot. No matter how much I tried to tone it down it is still too vivid for my liking. I think the rest of the model could be toned down a tad more too. I might also like to try my hand at making some custom decals. If I do I'll probably just hire out the work but it would be nice to have a set of waterslide decals. Since I already have a second print of this model I guess I'll have the opportunity to set those issues right.


Friday, November 20, 2020

Paint Water Do Not Drink

I've had an awful lot of time on my hands as of late and found myself feeling creative. Late at night after everyone has gone to sleep I've been working on various graphic designs and coming up with some hobby solutions in hopes of expanding my Etsy shop and putting together a few products for future model shows.

My first offering is a mug for washing your brushes in which I hope will help to avoid the dreaded confusion many of us have endured. 

On a long enough timeline every hobbyist has the moment that they put the dreaded dirty paint water to their lips. The lucky ones realize their error before it is too late, other's aren't so fortunate. Don't make that mistake, or if you already have, don't make it again with this stylish hazard striped dedicated dirty paint water mug. The warning "PAINT WATER DO NOT DRINK" is emblazoned around the mug in high contrast and 4 different languages, English, Spanish, German, and French.

I have many additional graphics in the works and an accessory or two geared toward the model makers out there.