For Sale - Catachan Leman Russ

I need to make way on my shelf for more of my Pardus 8th Armored Regiment so I am selling off my Leman Russ. It has a custom made barrel which can be swapped out for either a standard Battle Cannon, Punisher Gatling Cannon, or Demolisher Cannon. If interested stop by the listing on ebay and give it a look. I hope it finds a good home.

Previous Posts

Leman Russ Battle Tank

WIP - Leman Russ Battle Tank

Imperial Guard - Leman Russ Battle Tank

I've been fairly busy lately, playing and painting but neglecting blogging.  This tank has been a long time coming, I've finally finished one of the Leman Russ Battle Tanks.  This Model is equipped with my custom cannon collar which allows for quick swapping between the Battle Tank, Punisher, Demolisher, and Vanquisher cannons.

I used a tank accessory kit from Tamayo, necklace chain, wax rope, and decals for detail.  It was painted using the hairspray technique for added weathering effects.  For additional weathering I used dry brushing techniques, detailed application of metallic colors, and I applied dry pigments from Secret Weapon Miniatures.  It was all topped off with multiple coats of clear matte finish.

Let there be Punisher Cannons!

I wanted a gatling cannon I could hot swap on my Russ's so I sculpted my own and with a little RTV silicone put a mold together and got to casting.

I'm not entirely happy with the cast.  A few bubbles were picked up during the molding process and thus carried on to the castings.  I plan on making another mold in the future but for now these are good enough for personal use.  Once I have a better mold completed I plan on making this commercially available.

Leman Russ Battle Tank

After acquiring two Leman Russ Battle Tanks on Ebay I wanted to add some adaptability to them.  My first thought was to go with some type of magnet system but considering the basis of any cannon is a tube, I went with a collar system instead.  The idea being that a single size collar sits in place of the cannon and other attachments slip onto/into that one.

I started by cutting off the original cannon, which had already been modified into a Vanquisher by the previous owner.  Onto this I attached a short collar made of 7/16th inch tube styrene from Evergreen Scale Models. I can slip alternate cannons into/onto this collar changing the Leman Russ for whatever threat awaits it.

Left to right, Punisher, Battle Cannon, Demolisher

The Punisher Gatling Cannon was constructed out of 1/16th inch, 1//8th inch 3/8th inch and 7/16th inch styrene tubing.

To make the Demolisher Cannon I used three different diameter tubes. The outermost is 1/2" in diameter and 7/16" long. Inside that is a 7/16" diameter tube cut just a couple of millimeters shorter than the outer tube. Inside that is another tube 3/8" in diameter and 7/16" long. Once glued together (one inside the other) you get a short little barrel that has a 7/16" groove which the slip collar slides right into.

A detailed view of the rear of the Demolisher Cannon and the various tubes used in its construction.

To make the Battle Cannon I used a length of 3/8" tube with a small length of 7/16" tube for the muzzle brake. The vents in the muzzle brake were cut out using a razor saw, hobby knife, and my miter box. 

Leman Russ with slip collar.

Leman Russ with Battle Cannon

Leman Russ with Demolisher Siege Cannon

Leman Russ with Punisher Gatling Cannon